Wenko Vacuum-Loc Corner Rack, 2-Tier, Small

<p>You haven&apos;t got enough space in the bathroom for the care products? Then it&apos;s time for the practical bari corner shelf from the Vacuum-Loc series.&nbsp;</p><p>The mini 2-tier space-saving corner rack offers plenty of room for bathroom accessories. The worldwide innovation in mounting technology is called Vacuum-Loc! The unique system enables fast, easy, and reliable attachment of the accessories on all air-impermeable and slightly uneven surfaces. The new Vacuum-Loc system consists of a pump and mounting Locs; there is no need for drilling or screwing, and even suction pads are not necessary. The Vacuum-Loc system has European patent protection and guarantees a firm hold. Each mounting Loc has a load-bearing tensile force of up to 33 kg.</p> <p><strong>Features:</strong><br>Size :22.5x16x29.5cm<br>Material: Metal - Steel</p> <p>Vacuum-Loc- A system offers reliable fixing without drilling you can remove and placed it again and again without leaving residue or marks<br>1.Cleaning the adhesive surface The selected surface must first be cleaned with a clean, damp cloth. Here it is important that the subsurface is completely dry and above all free from grease when mounting. Therefore, bathroom or household cleaning agents should not be used for pre-cleaning. For best results, clean the mounting area with cleaning alcohol.<br>2.Fixing the vacuum adapter To attach to the desired surface, simply remove the cap on the front and the protective film of the back of the vacuum adapter. Please ensure that the small arrow is pointing down vertically (in the case of the towel rail, both arrows must point horizontally inwards).<br>3.Generating a vacuum Press the pump against the Loc and pull out the pump piston until a loud plop is heard. Remove the pump from the Loc, attach the pump piston again and repeat the procedure 3 times. Secure fixing works so easily with the Vacuum suction system from WENKO.<br>4.Can be immediately subjected to loads After the fourth time of applying the pump piston, the adapter can be immediately subjected to loads and the desired accessory can be hung on. To disassemble, simply press sideways on the valve, thus releasing the vacuum.</p> <p>&nbsp;</p>