Wenko Vacuum-Loc Adaptor

<p>Unique suction system for quick, easy, and safe attachment Holds on all air-impermeable surfaces, even on slightly uneven surfaces, extremely strong hold without drilling By vacuuming the air with the supplied pump, a vacuum is created in the loc Vac-locs can be repositioned as often as required and are residue-free removable.</p><p>Unique suction system for quick, easy, and safe attachment Holds on all air-impermeable surfaces, even on slightly uneven surfaces, extremely strong hold without drilling By vacuuming the air with the supplied pump, a vacuum is created in the loc Vac-locs can be repositioned as often as required and are residue-free removable.</p><p><strong>Features:</strong><br>Size : 6 x 2.8cm<br>Material: plastic</p> <p>Vacuum-Loc- A system offers reliable fixing without drilling you can remove and placed again and again without leaving residue or marks<br>1.Cleaning the adhesive surface The selected surface must first be cleaned with a clean, damp cloth. Here it is important that the subsurface is completely dry and above all free from grease when mounting. Therefore, bathroom or household cleaning agents should not be used for pre-cleaning. For best results, clean the mounting area with cleaning alcohol.<br>2.Fixing the vacuum adapter To attach to the desired surface, simply remove the cap on the front and the protective film of the back of the vacuum adapter. Please ensure that the small arrow is pointing down vertically (in the case of the towel rail, both arrows must point horizontally inwards).<br>3.Generating a vacuum Press the pump against the Loc and pull out the pump piston until a loud plop is heard. Remove the pump from the Loc, attach the pump piston again and repeat the procedure 3 times. Secure fixing works so easily with the Vacuum suction system from WENKO.<br>4.Can be immediately subjected to loads After the fourth time of applying the pump piston, the adapter can be immediately subjected to loads and the desired accessory can be hung on. To disassemble, simply press sideways on the valve, thus releasing the vacuum.</p> <p>&nbsp;</p>