Wenko Quadro Vacuum-Loc Tumbler

<p>Puristical square design made of shiny stainless steel and high-grade plastic. Removable, transparent tumbler. Stronghold on airtight, even and slightly uneven surfaces. Unique vacuum system which enables fixing without drilling and without using tools. Can be repositioned and removed without leaving marks.</p><p>They are a perfect addition to any bathroom, wet, or humid room. The dish has a discreet tray to capture any moisture, avoiding unsightly puddling on counter space. It is also detachable, for easy cleaning. The innovative Vacuum-Loc system. The Vacuum-Loc allows for easy, quick installation on any non-air-permeable surface, and on slightly uneven surfaces, using only a hand-held pump, and mounting Locs. The pump is used to extract the air between the Loc and the surface it is attached to, creating a vacuum seal capable of withstanding 13 lbs, immediately and indefinitely. There is no need for drills, hammers, screws, or nails, and none of the unpredictability of the suction cup. Vacuum-Loc products can be removed and repositioned at any time, without leaving any marks or residue behind.</p> <p><strong>Features:</strong><br>Material: stainless steel<br>Size: 7.5 x 10 x 10cm</p> <p>Vacuum-Loc- A system offers reliable fixing without drilling you can remove and placed it again and again without leaving residue or marks<br>1.Cleaning the adhesive surface The selected surface must first be cleaned with a clean, damp cloth. Here it is important that the subsurface is completely dry and above all free from grease when mounting. Therefore, bathroom or household cleaning agents should not be used for pre-cleaning. For best results, clean the mounting area with cleaning alcohol.<br>2.Fixing the vacuum adapter To attach to the desired surface, simply remove the cap on the front and the protective film of the back of the vacuum adapter. Please ensure that the small arrow is pointing down vertically (in the case of the towel rail, both arrows must point horizontally inwards).<br>3.Generating a vacuum Press the pump against the Loc and pull out the pump piston until a loud plop is heard. Remove the pump from the Loc, attach the pump piston again and repeat the procedure 3 times. Secure fixing works so easily with the Vacuum suction system from WENKO.<br>4.Can be immediately subjected to loads After the fourth time of applying the pump piston, the adapter can be immediately subjected to loads and the desired accessory can be hung on. To disassemble, simply press sideways on the valve, thus releasing the vacuum.</p> <p>&nbsp;</p>