Wenko Quadro Vacuum-Loc Towel Ring

<p> "Puristical" square design made of shiny stainless steel and high-grade plastic. Stronghold on airtight, even, and slightly uneven surfaces. Unique vacuum system which enables fixing without drilling and without using tools. Can be repositioned and removed without leaving marks.The Vacuum-Loc series Quadro combines puristic, elegant shapes and high quality. The bathroom accessories from this series not only convince by the ease of their attachment, but also by their square design and their shiny, rustproof stainless steel material. They are therefore optimally suitable for wet areas. <br /><p><strong>Features:</strong><br />Size :18,5 x 3,5 x 14 cm <br /> Material:Metal - Stainless steel, Loc: Plastic - ABS, Ablage: Plastic - PS </p> <p> Vacuum-Loc- A system offers reliable fixing without drilling you can removed and placed again and again without leaving residue or marks 1.Cleaning the adhesive surface The selected surface must first be cleaned with a clean, damp cloth. Here it is important that the subsurface is completely dry and above all free from grease when mounting. Therefore, bathroom or household cleaning agents should not be used for pre-cleaning. For best results, clean the mounting area with cleaning alcohol. <br /> 2.Fixing the vacuum adapter To attach to the desired surface, simply remove the cap on the front and the protective film of the back of the vacuum adapter. Please ensure that the small arrow is pointing down vertically (in the case of the towel rail,both arrows must point horizontally inwards). <br /> 3.Generating a vacuum Press the pump against the Loc and pull out the pump piston until a loud plop is heard. Remove the pump from the Loc, attach the pump piston again and repeat the procedure 3 times. Secure fixing works so easily with the Vacuum suction system from WENKO. <br /> 4.Can be immediately subjected to loads After the fourth time of applying the pump piston, the adapter can be immediately subjected to loads and the desired accessory can be hung on. To disassemble, simply press sideways on the valve, thus releasing the vacuum. </p> <p> &nbsp; </p>